Caplugs industrial service plugs were developed for use during repair and maintenance of hydraulic systems.  These durable plugs are easily pushed into hydraulic fittings to contain fluid and prevent spillage.   Designed with a hexagon-shaped  head for easy gripping and hand tightening, there are no tools needed for installation or removal.  Packaged in four different configurations and reusable blister-packs for your convenience.

• Temperature range: –25°C to +90°C (–13°F to +194°F)
• Does not contain silicone
• For non-pressurized systems only
• Resistant to most oils and chemicals
• Good resistance to aliphatic hydrocarbons like fuel oils, diesel and propane.
• Good mechanical abrasion, low deformation composition under pressure.
• Permeable at low gas pressures
• Moderate weather/ozone resistance
• Low resistance to aromatic and polar solvents.
• Guidance for use:
• Always clean before reuse
• Only for industrial use
• Keep out of reach of children

Colour: Yellow