Caplugs offers a wide array of unique plastic plugs for a variety of applications. Whether the job requires a plastic plug with a particular flange size for extra protection or a specific tab added to help when removing from hard to reach areas, our line of plastic plugs has a solution for any possible use.
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
| Information |
This tapered plug features a well-engineered centre-pull tab that extends above the flange area, making it easy to grasp and remove from a variety of threaded and non-threaded ports. Ideal for fitting with internal o-rings. Centre-pull tab will not break off during removal. When used as a Plug: "B" dimension should be at least .020" more than diameter to be plugged. Material: Low Density Polyethylene Colour: Orange |
| Description | Our tapered plastic plugs are designed with sturdy centre pull-tabs, allowing for easy application and removal from a variety of threaded and unthreaded ports, making them ideal for o-ring application. |
| Information |
# Material: # |
||||
| Description | #
|
| Information |
Mechanical protection for tubing, shafts, rods and cables as they pass through holes in sheet metal is provided by Series GRO grommets. Easily snapped in place, they are held securely by a molded bead until deliberately removed. Material: FlexTemp (Thermoplastic Rubber) Colour: Black |
| Description |
| Information |
The tapered design of this product allows them to function as both Cap and Plug. For caps, the "C" Dimension must be at least .020" less than the diameter to be capped. For plugs, the "B" dimension must be at least .020" greater than opening. Heat resistance, 180-200 Farhenheit. Standard Color is Orange. Material: Low Density Polyethylene Colour: Orange Colour for T-Parts: Red |
| Description | Able to serve as both a cap and plug, these low-density polyethylene plastic plugs are tapered so they can plug inner diameters or cover various outside diameters. |
| Information |
CP Series: Core Plugs AP Series: Anchor Plugs Colour: Black Material: see chart HDPE: High Density Polyethylene PPCP: Polypropylene CoPolymer HIPS: High Impact Polystyrene |
| Description |
| Information |
Its shallow design enables it to be placed in the ends of mailing, packaging or shipping tubes or any container that requires a secure fit. Designed with easy-to-use finger-pull tabs that allow for fast and easy removal. Material: Low Density Polyethylene Colour: White |
| Description | Typically used in packaging or mailing tubes, these common plastic plugs are designed with finger pull-tabs for easy removal and provide a secure fit in any capacity. |
| Information |
Specifically designed to plug and protect Type L and M-style tubing. Tapered body with reinforced-cross braces provides exceptional protection for the configuration of the tube. Material: Low Density Polyethylene Colour: Blue |
| Description | Looking to plug Type K-style tubing? These polyethylene plastic plugs are specifically fitted with a tapered body and reinforced-cross braces to keep the tube end protected. |
| Information |
Provides an attractive, finished appearance for access holes in sheet metal. Widely used on automobile bodies, tanks, appliances or in any application where an attractive appearance is needed. Flexible yet durable. Snap-in ring provides a secure fit. Material: Low Density Polyethylene Colour: Black |
| Description | |
| Information |
Provides an attractive, finished appearance for access holes in sheet metal. Widely used on automobile bodies, tank, appliances or in any application where an attractive appearance is needed. Flexible yet durable. Snap-in ring provides a secure fit. Material: Low Density Polyethylene Colour: Black |
| Description |
| Information |
Closes unneeded holes in chassis or other surfaces. Locks firmly into chassis or surfaces up to 1/8" thickness with quick and easy installation. Convex matte-finish head tapers to thin edge. Material: Nylon Colour: Black |
| Description |
| Information |
Straight-sided, thin-wall closures designed to protect threaded connectors. Flanged end makes for easy removal in hard-to-reach areas. Versatile design will protect a variety of threaded and non-threaded applications. Material: Low Density Polyethylene Colour: Yellow |
| Description | Designed to protect numerous threaded and unthreaded applications, these versatile plastic plugs are straight-sided and have a flanged end for easy removal from hard to reach places. |
| Information |
This tapered plug features a side-tab design that extends above the flange making it easy to grasp and remove from variety of threaded and non-threaded fittings. Great for use in hard-to-reach locations. Side tab will facilitate ease of removal. When used as a Plug: "B" dimension should be at least .020" more than diameter to be plugged. Material: Low Density Polyethylene Colour: Orange |
| Description | These tapered plastic plugs come equipped with a side-tab that serves as a handle for easy implementation or removal from various threaded or non-threaded fittings. Commonly used in hard-to-reach locations. |
| Information |
Specifically designed to protect Type K-style tubing. Tapered body with reinforced-cross braces provides exceptional protection to the configuration of the tube end. Material: Low Density Polyethylene Colour: Green |
| Description | Looking to plug Type K-style tubing? These polyethylene plastic plugs are specifically fitted with a tapered body and reinforced-cross braces to keep the tube end protected. |
| Information |
The extra-wide flange of the WWX Series provides extended visibility. This design prevents the mating component from being installed without first removing the cap/plug. Now available in 17 sizes, this versatile part may easily be used as a cap or plug, depending on application. Material: Low Density Polyethylene Colour: Yellow |
| Description | Able to serve as both a cap or plug, these enlarged plastic plugs prevent mating components from being installed without first removing the low-density polyethylene cap. Available in 13 different sizes. |
| Information |
Designed with a wider and thicker flange for added protection. When used as a plug (going into the application) the “B” dimension must be at least .020” larger in diameter than the plug-in application. Material: Low Density Polyethylene Colour: Yellow |
| Description | Able to serve as both a cap and plug, these versatile plastic plugs are designed with a wide and more sturdy flange, giving the polyethylene part increased protection and security upon application. |
